Related Articles
47 Comments
  1. Reply
    jujumber March 30, 2022 at 3:24 am

    How was that cut?!

  2. Reply
    thisismiller March 30, 2022 at 3:24 am

    Technically a slip fit

  3. Reply
    YeOldeBilk March 30, 2022 at 3:24 am

    Most satisfying thing I’ve seen

  4. Reply
    Fibe111 March 30, 2022 at 3:24 am

    very impressive work keep it up.

  5. Reply
    watscracking March 30, 2022 at 3:24 am

    That’s beautiful. Also, you can put your weed in there

    https://youtu.be/CKOc6hXMDhc

  6. Reply
    nekdb March 30, 2022 at 3:24 am

    I’m moist.

  7. Reply
    poicephalussenegalus March 30, 2022 at 3:24 am

    Impressive.

  8. Reply
    KASVendetta March 30, 2022 at 3:24 am

    Oooh, that’s satisfying! 😀

  9. Reply
    emjaysea March 30, 2022 at 3:24 am

    I’ve had the worst damn luck with these lately. I did two, one from oak and one from walnut that both immediately shrunk and wouldn’t fit by the next day. Both from wood that had been in the shop for months.

  10. Reply
    seattlenerdboy March 30, 2022 at 3:24 am

    I came.

  11. Reply
    Stone-Bear March 30, 2022 at 3:24 am

    wish he’d press fit me

  12. Reply
    stanilavl March 30, 2022 at 3:24 am

    That’s impressive. I wouldn’t say it’s press fit though.

  13. Reply
    ilikeyoureyes March 30, 2022 at 3:24 am

    Can’t see the line, can ya, Russ?

  14. Reply
    LesWhite March 30, 2022 at 3:24 am

    😌

  15. Reply
    frenchfryes_- March 30, 2022 at 3:24 am

    R/oddlysatisfying

  16. Reply
    Smart_Example8786 March 30, 2022 at 3:24 am

    [Woodturning Toothpick](https://youtu.be/V1oRZxRgj9g)

  17. Reply
    MightyWhiteSoddomite March 30, 2022 at 3:24 am

    You put your weed in there

  18. Reply
    HybridVeneer March 30, 2022 at 3:24 am

    That was downright sexy.

  19. Reply
    wheelbra March 30, 2022 at 3:24 am

    What’s it for?

  20. Reply
    whycantifindmyname March 30, 2022 at 3:24 am

    Finally! A joint/seam that i can actually upvote! Beautifully executed

  21. Reply
    Fritzed March 30, 2022 at 3:24 am

    I read the title as “please fit”, which is what I would be saying.

  22. Reply
    Surrogard March 30, 2022 at 3:24 am

    *clicks with tongue* – Noice!

  23. Reply
    rhodynative March 30, 2022 at 3:24 am

    Wowww

  24. Reply
    sardarvj March 30, 2022 at 3:24 am

    @perfectfit

  25. Reply
    Halfbloodjap March 30, 2022 at 3:24 am

    Well I’m impressed(fit)

  26. Reply
    BillyBobBarkerJrJr March 30, 2022 at 3:24 am

    Perfect job! Excellent job lining up the grain, too. Do you have a picture of it finished?

  27. Reply
    KaptainKlein March 30, 2022 at 3:24 am

    Impressive

  28. Reply
    melanthius March 30, 2022 at 3:24 am

    Ever considered being a machinist?? Nice!

  29. Reply
    Baboocha March 30, 2022 at 3:24 am

    That’s insane

  30. Reply
    boyo52 March 30, 2022 at 3:24 am

    Hot

  31. Reply
    45pintsinabout2hour March 30, 2022 at 3:24 am

    Uhh yeah

  32. Reply
    zerocoke March 30, 2022 at 3:24 am

    My man 👏🏻👏🏻👏🏻

  33. Reply
    No_Carry_3028 March 30, 2022 at 3:24 am

    Eye Porn came back too watch

  34. Reply
    BTrapspringer March 30, 2022 at 3:24 am

    r/oddlysatisfying would love this too!

  35. Reply
    veideway March 30, 2022 at 3:24 am

    I wish I were this fit.

  36. Reply
    mmm_burrito March 30, 2022 at 3:24 am

    Oh fuck you. That’s annoyingly well done. I’m jealous of the skill.

  37. Reply
    Mish106 March 30, 2022 at 3:24 am

    Hnnnnng

  38. Reply
    NotSoSkilled1 March 30, 2022 at 3:24 am

    I recently purchased a lathe and have been practicing with it. I’ve never turned anything before so I’ve been consuming a lot of YouTube videos about how to use the various tools. I’m determined to use the traditional turning chisels before purchasing and using the carbide tipped tools. Any recommendations on books that may help me?

  39. Reply
    Casey4147 March 30, 2022 at 3:24 am

    Oh, lordy, I read that as “please, fit” the first time thru.

    Beautiful work.

  40. Reply
    onomatopear March 30, 2022 at 3:24 am

    Nice job!

  41. Reply
    stuffedcouchpotato March 30, 2022 at 3:24 am

    r/oddlysatisfying

  42. Reply
    jgehringer March 30, 2022 at 3:24 am

    r/oddlysatisfying

  43. Reply
    sirpinky1337 March 30, 2022 at 3:24 am

    MAGICAL

  44. Reply
    Unemployedloser55 March 30, 2022 at 3:24 am

    Ah. My autism.

  45. Reply
    Transill March 30, 2022 at 3:24 am

    omygawd

  46. Reply
    buddynotbud3998 March 30, 2022 at 3:24 am

    i audibly gasped

  47. Reply
    hip-hop_anonymous March 30, 2022 at 3:24 am

    But how will it fit tomorrow?

Leave a reply

No widgets added. You can disable footer widget area in theme options - footer options